5 Tips To Help You Keep Your Conveyor Chains Operational

Conveyor chains are used to drive different types of conveyor units and use different types of power transmission. If you want to get the most out of your equipment, make sure you maintain them. This is even more important if they are installed in the mining and construction industry. Given below are a few tips that can help you ensure your conveyor chains will continue to work properly.

1. Follow the Maintenance Schedule

First of all, you may want to inspect and service them to ensure proper alignment, lubrication and tension. If inspected on a regular basis, they can last up to 15,000 hours. It’s better if you schedule filter and oil changes every 3 months. On the other hand, the cleaning of bigger parts, such as shafts, machine lubrication and replacement of damaged or worn sprockets and sideplats should be done on an annual basis.

Following the maintenance schedule is paramount, especially if you have installed the conveyor chains in the construction and mining industry.

2. Lubricate Wisely

For smooth operation, conveyor drives and chains should be free of moisture and dust. Most of these systems require petroleum-based oil. It’s not a good idea to opt for heavy greases and heavy oils. The reason is that they are overly stiff and can’t lubricate the system properly. Given below are some common ways of lubricating the conveyor chains. Some of them are listed below:

Stream lubrication
Disk lubrication
Drip lubrication
Manual lubrication

Based on the power and chain speed, the right method can be used. For reducing wear and tear and enjoying all the benefits, it’s important that you lubricate the system properly.

3. Get Heat-Treated Parts

Heat treatment can be used to improve the mechanical components. Therefore, manufacturers control the treatment methods for best results. In other words, to reduce wear and tear, it’s important to perform proper heat treatment.

Case hardness and depth are the two primary parts of component heat transfer. This plays a great role as far as resistance and durability is concerned. If the depth is too much, the parts may break while working due to brittleness.

4. Make sure there is Proper Alignment and Tension

Make sure you check the slack span and chain tension, and perform the required maintenance. If you need to reduce the tension, you can eliminate two pitches and then connect the chain again. However, you may need to replace the entire chain if the wear and tear goes beyond the functional limits.

Also, you may not want to connect new chains to the worn one as it can damage the drive. Misaligned sprockets can also cause the link plates of the roller chain to get a lot of wear and tear.

5. Check the Primary Parts

Typically, conveyor chains have two main parts that go through wear and tear: sprockets and chain. Chain stretching happens due to this very reason and results in the complete replacement of the sprockets and chain.

Therefore, you should inspect conveyor chains for any broken parts, deformation and cracks.

In short, these are the tips you can follow to maintain your roller chains.

How to Become a Fashion Designer When You Are a Kid

There are two schools of thought on the qualities needed to become a fashion designer. One school of thought believes that an eye for fashion is inborn and God gifted and cannot be acquired through practice and perseverance. The other school of thought on the other hand believes that it is hard work and perseverance that can make a style designer out of a kid.

However, a look at the successful fashion designers of the world would confirm that it is a blend of talent and hard work that can make a successful fashion designer out of a kid.

So what are the qualities that make a successful fashion-cum-body art designer? Let us take a look at the principles and qualities:

First, a natural flair for design is a must, be it a design for men or design for women. An aspiring designer must have the basic acumen for men’s fashion or women fashion. The fashion designer must be able to, on the top of the head, decide a design for any category whatsoever.

Second, an aspiring fashion designer needs to have a formal training. A diploma or a degree in a fashion institute of repute will just do fine. The fashion designer will be adequately trained on the various aspects of the business of fashion designing which are so critical. This will go on to make a complete designer.

Third, an aspiring designer must have an ideal blend of knowledge with the theoretical aspects of fashion design as well as the practical aspects of fashion design. Hence, the fashion designer will design fashion with a blend of theoretical knowledge and its ideal practical application. Such a combination goes on to make for a good fashion designer.

Fourth, an aspiring designer must be good at making basic sketches. A basic sketch gives a good idea of how the design will finally like. Hence, a good fashion art designer must be able to visualize in mind how the design will look like in the end and draw a sketch accordingly.

Fifth, good visualization skills for a fashion designer are a must. A good designer must also have an eye for details. While designing the most intricate of the designs, an eye for detail is a critical quality that a designer must possess. A good visualization serves as an inspiration and sets the objective for the final design.

Hence, a designer must be equally good at men’s fashion and women fashion. This profession is however, not a bed of roses, with high competition and a high failure and rejection rates, it is always a steep climb.

Become a Fashion Designer With These Basic Steps

Becoming a fashion designer is a creative journey in uncovering the student’s likes and dislikes. Styles and fads come and go and then come around again. This is true of the fashion design industry also, particularly so! The industry is often influenced by the entertainment industry (television, movies, music, etc.) For example, “That 70’s Show” gave hippie fashion a new comeback chic. This is true of other movies as well. A great example of this would be “Pirates of the Caribbean” that brought about a huge influx of skull and cross bones designs. The typical pirate symbol, more related to a gothic or punk style, became mainstream after the debut of the movies.

This pop culture influence inspires mass market designers. However, couture fashion designers strive to be the source of the inspiration rather than an imitator. The difference between this can be found in the training of the merchandiser versus the designer. Many aspiring fashion designers choose to go into fashion merchandising. However, these two fields require slightly different curriculum. One will focus on sales, marketing, and business where as the other–fashion design–will focus on creativity and imagination in bringing ideas and concepts to life.

Following middle school, students can choose college preparation courses to direct their educational tracks to their own possible careers. For a student wishing to take the path of a designer of any type, art classes are essential to building the basic knowledge and core concepts that they will use.

High school courses should be selected to assist in building a professional portfolio to show to potential design colleges. By starting their educational planning very early, it is possible for students to make the most of their high school years by focusing on extracurricular activities that will add spice to their college applications. For example, potential fashion designers can take classes not only in art but also specialized math and computer classes, multimedia classes, and drama activities that will allow them to explore different aspects of the fashion world. Some high schools even offer classes in small business ownership or entrepreneurial skills.

For students who end up at the college level and wish to break in to the fashion design industry, it is never too late. Courses in drawing, painting, life drawing, and silkscreen, and color theory, fashion and art history are some of the beginning requirements for any fashion design student. Advanced students of fashion design will continue with patternmaking, sewing basics, advanced sewing techniques, and digital designing.

It is crucial for a fashion design student to have access to this type of basic curriculum in college in order to prepare for the true test of their abilities: their internship. Once the student has taken the basic and advanced courses, it is time for them to specialize in some aspect of the fashion industry. When people think of fashion, they think of runway shows and couture collections. There are fashion centers throughout the world, but most people tend to consider New York City the center of all fashion design. If the college student did not choose a college near a fashion design center, it may be possible for them to choose an internship located in that area. Some other possible internship locations would be Washington, DC, Los Angeles, Miami, Atlanta, Chicago, and other metropolitan areas.

The best source of internship possibilities will be the college faculty and guidance counselors. It is important to do your homework by researching potential internships; but, they can definitely guide the student to someone that they may not have considered.

The fashion world has its niches. Every designer starts somewhere. They do not just graduate from college and poof have their own design house and their own collections. They were mentored by someone in the business. Some of them were self taught and did not have the opportunity to study in a college environment but learned in the school of hard knocks. Whatever the case, if there is a desire to learn the fashion design business, then there is a way to do it.

Consider working at a place that does alterations or tailoring to build up sewing skills. Consider designing your own clothes. Think of functionality, practicality, body type, personal statements, coloring and fabric choice. Study the masters–who is on the edge of fashion now that you want to emulate? Why do you like their style? What IS your style?